Minkor

Minkor

Defy the corrosion - not the tool!

Corrosion resistant tool steel and ease of machining have long been incompatible bedfellows. That's all in the past, now we have MINKOR®. Better boring and fast milling: made possible with MINKOR®. Deep cooling bores and complex milling work can now be done in almost two-thirds of the time. When using corrosive plastics, the selection of a resistant mould making steel is crucial to the service life of the mould.

For mould frames and inserts - it's well worth trying!

MINKOR® — VarioPlan3
Semi-finished product for frame and insert

6-sided fine-milled with bevel and radius

Dimensions as required

VP_Radius_beschnitten
Geraetetraeger_Learjet_III
IMGP0791
IMGP0956

For jigs and machines - strength needed, not corrosion.

MINKOR® - Properties, technical data and processing:

  • tempered through and through to approx. 300 HB (950—1100 N/mm²)
  • good heat conduction (21.6 W/m²K at 20 °C; 23.2 W/m²K at 50 °C; 24.9 W/m²K at 350 °C)
  • welds very well (pre-heat to 100 °C)
  • corrosion resistant (comparable with 1.2085 / 1.2316)
  • dimensionally stable
  • significantly tougher than others
  • (notch impact energy ISO V-sample: MINKOR: 10-12 Joule; 1.2085 / 1.2316: 4-6 Joule)
  • drills very well, even with cooling bores
Deep hole drilling ø 12 mm MINKOR® 1.2316 1.2085
Cutting speed 49 m/min 45 m/min 45 m/min
Feed rate 35 mm/min 20 mm/min 25 mm/min
Tool life 650 min 400 min 500 min
Stock removal rates 13.19 cm³/min 7.50 cm³/min 9.42 cm³/min
  • Mills very well with high feed rate
Face milling ø 160 MINKOR® 1.2316 1.2085
Cutting speed 100 m/min 95 m/min 95 m/min
Feed rate (cutter teeth = 10) 1300 mm/min 810 mm/min 1000 mm/min
Infeed, contact 4 mm; 140 mm 4 mm; 140 mm 4 mm; 140 mm
Tool life 60 min 25 min 40 min
Stock removal rates 738 cm³/min 461 cm³/min 568 cm³/min
Minkor
Minkor
1.2085
1.2085
Reference analysis (indicative values):
C Si Mn P S Cr Ni Mo
≤0.05 % 0.30 % 1.00 % 0.03 % 0.15 % 13.5 % 0.30 % 0.15 %
Stock dimensions (raw material):
Thicknesses in formats 500 x 1000 mm or 1020 x 2000 mm:
20 mm 30 mm 40 mm 50 mm 60 mm 70 mm 80 mm 90 mm
100 mm 120 mm 140 mm 170 mm 205 mm 225 mm 255 mm 305 mm
VarioPlan (dimensions as required):
Width Thickness Length
min. 50 mm min. 10 mm min. 50 mm
max. 500 mm max. 300 mm max. 2.000 mm

Colour coding: white / purple

back to material

Obtainable as the following products:

Downloads

Minkor

Plastic mould steel, resistant to corrosion, hardened and tempered, excellent cutting property

Attention please!

Some features of our webshop are not supported by your current browser version.
We recommend updating your browser or using a different browser.